Your Position:   Home > News

How to maintain the sewing machine daily
First, the cleaning of the sewing machine
    (1) cleaning the teeth to remove the needle plate and feed the teeth between the teeth, remove cloth hair, dust, and add a small amount of sewing machine oil.
    (2) cleaning the shuttle bed shuttle bed is the core of the sewing machine work, but also the most prone to failure of the place, so often to remove dirt and add a small amount of sewing machine oil.
    (3) cleaning of other parts of the sewing machine surface and the various parts of the panel should always clean.
    Second, the sewing machine lubrication lubrication
    You must use a dedicated sewing machine oil. The sewing machine should be used once a day or a few days after the oil should be fully added, if the refueling between the use of the machine should be idle time, so that the oil fully infiltrated and thrown off the excess oil, and then clean the cloth And the table wipe clean, so as not to get dirty sewn material. And then threading the rags, the use of sewing thread movement wipe, throwing the excess oil traces, until the rags have no oil traces so far, and then the official sewing.
    Refueling parts are:
    (1) the oil holes on the head, lubricate the upper shaft and the components connected to the upper shaft.
    (2) the components inside the panel and the moving parts connected to the parts. Lubricate the presser foot and the needle bar and the components connected to it.
    (3) wipe the lower part of the machine board and add some oil.
    The fuel filler and refueling parts of the fuel do not have too much, one or two drops on the line.
    Third, maintenance of sewing machines should also note the following:
    1. After the work is completed, the needle into the pinhole plate, lift the presser foot, but also with the machine cover the head, to prevent dust intrusion.
    2. Start work, first check the main parts, set the severity of how the situation, with or without special sound, needle is normal, etc., such as abnormal phenomenon found, should be timely maintenance.
    3. Machine used for a long time, to conduct a overhaul, such as the discovery of wear parts, to replace the new.

Related Tags:High Quality Direct Drive Machine Sale,Custom Button Holing Machine Supplier,Supplier Of Overlock Sewing Machine
Click here to leave a message

Fill in your information